LIGHTING IQ • STEP-BY-STEP GUIDE

How to Create a Lighting Timer

Set up a timer to turn your lighting on and off automatically, using your chosen pattern, times and repeat days. Follow the video or work through the screenshots at your own pace.

Go to written steps ↓

VIDEO GUIDE

Watch the step-by-step video

Pause whenever you need to. The written steps and screenshots below follow the same sequence.

FOLLOW THE STEPS

One step at a time.

Each white-and-cyan circle shows exactly where to tap. Follow the screenshots in order.

  1. Open your controller

    From the Controller screen, tap your controller to open it.

    Open your controller: tap indicator on open your controller.
    Tap the screenshot to enlarge
  2. Open Automated Timing

    Tap the timer icon at the bottom to open Automated Timing.

    Open Automated Timing: tap indicator on open automated timing.
    Tap the screenshot to enlarge
  3. Add a timer

    Tap the plus icon in the top-right corner to add a timer.

    Add a timer: tap indicator on add a timer.
    Tap the screenshot to enlarge
  4. Name your timer

    Tap Schedule Name and enter a name you’ll recognize. We’re using Timer as an example.

    Name your timer: tap indicator on name your timer.
    Tap the screenshot to enlarge
  5. Choose your lighting

    Tap Schedule Scene to choose what your lights will display.

    Choose your lighting: tap indicator on choose your lighting.
    Tap the screenshot to enlarge
  6. Choose Pattern

    In this example, tap Pattern.

    Choose Pattern: tap indicator on choose pattern.
    Tap the screenshot to enlarge
  7. Choose your pattern folder

    Scroll through the folders, then tap the folder containing your desired pattern.

    Choose your pattern folder: tap indicator on choose your pattern folder.
    Tap the screenshot to enlarge
  8. Choose a pattern

    Tap the pattern you want to use. Here, we’re choosing Holly n berry.

    Choose a pattern: tap indicator on choose a pattern.
    Tap the screenshot to enlarge
  9. Choose the start time

    Tap Action On to choose when your lights turn on. You can choose a specific clock time, or use Sunrise or Sunset where shown.

    Choose the start time: tap indicator on choose the start time.
    Tap the screenshot to enlarge
  10. Choose Sunset

    For this example, we’re choosing sunset.

    Choose Sunset: tap indicator on choose sunset.
    Tap the screenshot to enlarge
  11. Save the start time

    Tap Save in the top-right corner to keep that start time.

    Save the start time: tap indicator on save the start time.
    Tap the screenshot to enlarge
  12. Choose the stop time

    Next, tap Action Off to choose when your lights turn off.

    Choose the stop time: tap indicator on choose the stop time.
    Tap the screenshot to enlarge
  13. Set your clock time

    Scroll the time picker to the time you want. Here, we’re setting eleven PM. Check the hour and minutes, and make sure you’ve selected AM or PM correctly.

    Set your clock time: 11:00 PM selected in the time picker.
    Tap the screenshot to enlarge
  14. Save the stop time

    Tap Save to keep that stop time.

    Save the stop time: tap indicator on save the stop time.
    Tap the screenshot to enlarge
  15. Choose repeat days

    Tap Repeat to choose the days your timer should run. Select the days you want. In this example, we’re keeping every day selected.

    Choose repeat days: tap indicator on choose repeat days.
    Tap the screenshot to enlarge
  16. Save the repeat days

    Tap Save to keep your repeat days.

    Save the repeat days: tap indicator on save the repeat days.
    Tap the screenshot to enlarge
  17. Review and save

    Review your timer’s name, pattern, start time, stop time, and repeat days. Then tap Save to create the timer.

    Review and save: tap indicator on review and save.
    Tap the screenshot to enlarge
  18. Your timer is ready

    Your new timer now appears under Automated Timing. Check that its switch is on. You’re all set. For more help, visit the Lighting IQ Help Center.

    Your timer is ready: Timer appears enabled with Sunset, 11:00 PM and all seven days.
    Tap the screenshot to enlarge

Still having trouble?

If your timer is missing, return to Automated Timing and check whether it was saved. If it appears but is switched off, turn its switch on. Review the selected pattern, start and stop settings, AM/PM and repeat days. If you still need help, contact Lighting IQ.

KEEP EXPLORING

Getting Started & Connectivity

START HERE

How to Connect or Reconnect Your Lighting Controller to Wi-Fi

Connect your Lighting IQ controller to your home Wi-Fi, reconnect it after losing a connection, or move it to a new network. Follow the video or work through the steps below at your own pace.

WE'RE HERE TO HELP

Still Need Help?

Contact Lighting IQ support and tell us which step you're on and what the app shows. Do not send your Wi-Fi or custom controller password.

Contact Lighting IQ